DAC Commander

Plastic Bodied Heavy Duty Telephone

Full keypad, Full Keypad with Memory, CB and 1, 3 and 6 button programmable autodialler telephones Robust and weather resistant to IP65 Dual purpose design for wall or desk mounting, simple installation Industry standard robust handset c/w Armoured Cord DTMF/LD and earth/timed break recall Large tactile buttons, easy to see and operate CE compliant (SMART option tested to iCTR 37 / CTR 38) Optional variant available with SMART (Self Monitoring and Reporting facility)

The Commander family of telephones are tough weather resistant units built to withstand operator abuse and environmental extremes.

The Commander body is made from glass filled polyester to alleviate rust and corrosion. Coupled with its ergonomically designed handset and 1 metre long armoured cord, it is aesthetically pleasing to the eye. The elimination of moving parts brings new levels of reliability to industrial and weather resistant telephones.

Internal switching provides for LD/MF and ELR/TBR operation to enable connection to most PABX, PBX and PAX systems. Time out is standard. Should the handset be left off-hook, the Commander will automatically revert to normal on-hook state after a period of 6-8 minutes. Also standard fitting is an inductive coupler for the hard of hearing.

Keypad options range from full 15 key to zero for the CB version.

The 15 keypad version includes:
'S' - 'Microphone mute' or 'Silence'
'R' - 'Recall'
'LR'- 'Last number redial'

Commander Modules

Keypad Diallers

These models are configurable to be fully compatible with most PABX's or PTT networks. Loop disconnect (LD) and Tone dialling (DTMF) systems are internally selectable, as are a variety of recall systems, Timed Break Recall (TBR), Earth Loop Recall (ELR), and Hook Flash.

1, 3 & 6 Button Autodiallers

Commander 3 button autodialler

These models are programmable via an internal keypad. A Microphone Muting facility guards against unauthorised calls made with a remote MF interrogator. To make a call, simply lift the handset and press a single button. The pre-programmed number (up to 24 digits) will then dial automatically

Central Battery (CB)

Commander (CB)

This member of the family can be used as a hot line or lift and press. Operating power is drawn from the telephone line.

SMART Option

SMART Monitoring and Reporting Telephone optional variants available, please call.

Technical Specifications

Non-SMART Versions
Speech	Transmission to BS63 17: 1982 Part 13, Class A
Dialling Data	LD: to BS 6305: 1982, Part 4.4.2. Impulse rate: 10 ips Mark/space ratio: 2:1. MF: BS6305: 1982, Part 4.4.3. MF impedance: Class A MF transient voltage: Class A Dialling tones meet international standard requirements.
Integral Programming Keypad	Autodialling models only
SMART Versions
Testing	Testing to iCTR37/CTR38l
All Versions
Ringing Tone	Shrill warble tone, 80 dBA @ 1 metre typical
Hookswitch	Electronic with no mechanical moving parts
Time out	Enforces a fixed call maximum time limit to 6-8 minutes from lifting of the handset. This facility can also be disabled.
Recall Button	Internally switchable from Earth Loop Recall, Timed Break Recall, or Hook Flash.
Power Supply	Drawn from the telephone line
Operating Temperatures	-20 deg C to +55 deg C
Relative Humidity	To 95% (non-condensing).
Degree of Protection	IP65.
Casing Material	Glass filled polyester. Colours yellow or grey or special to order
Colours Available	Yellow or grey as standard or other colours to order
Handset Material	Cycoloy (2850) with stainless steel spiral cord
Keypad	Weathersealed tactile digital keypad
Weight	3 kg approximately
Dimensions	H 292 x W 190 0x D 140mm
Fixing Centres	H 270 x W 145mm
Approvals	This mark indicates compliance with the following directives: Radio & Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE) This mark indicates compliance for inductively coupling to Hearing Aids having a `T' switch position in accordance with the relevant Oftel Code of Practice. For specific country approval, please call